Showing 121–140 of 145 results
Other mounting systems
Vibration mounting with fixing for heavy loads.
Vibration mounting with fixing for heavy loads.
V1B-5798
Very low frequency isolators-shock absorbers.
Very low frequency isolators-shock absorbers with viscous high damping with pre-compression device that facilitates assembly, dismantling and casual fit.
Structural damping systems
Is made of an high damping material bonded on an aluminium plate.
This damper is made of an high damping material bonded on an aluminium plate.
A self adhesive layer on the elastomer to ease the installation.
This product will reduce vibrations and noise.
The damping is due to the shearing of the high damping layer.
V1H-6000
The V1H-6000 mounting steel have a mounting plate, cover and swaged steel shaft.
The V1H-6000 and V1H-6100 mountings steel have a mounting plate, cover and swaged steel shaft.
This mounting is available with stainless steel or mild steel zinc plated metal work.
The resilient parts are stainless steel wire cushions.
The steel parts are zinc plated.
MV-7000
Metal shock absorber working in compression and adding a limit switch.
Metal shock absorber working in compression and adding a limit switch.
– Shroud, cup and base in light alloy AG3. Satin finished.
– Stainless steel 18/8 springs.
– Weight (aprox): 15-20 gr
Strasonic ®
A range of complex materials designed to provide the best acoustic isolation.
STRASONIC is a range of complex materials designed to provide the best acoustic isolation. Their structure is based on polyurethane foams or cellular rubber.
Their main function is to reduce airbone noise (Isolation, Absorption and Damping) in partial or complete enclosures of machinery.
MV-7001
Steel shock absorber working in compression and adding a limit switch.
Steel shock absorber working in compression and adding a limit switch.
– Shroud, cazoleta and satin light alloy AG3.
– Stainless steel 18/8 springs.
– Weight (aprox): 40 gr
VIB LD 03 Decoupling washers
Respect the criteria of acoustic discretion and protection against shocks.
Elastomer rings for linking and positioning of equipment while maintaining acoustic discretion and protection from shocks.
A decoupling washer is composed of:
– Two bonded elastomer washers;
– One stainless steel anti-shock washer;
– One stainless steel preload spacer.
7002
The 7002 damper has a satin finish treated AG3.
The 7002 damper has a satin finish treated AG3 casing and mounting plate, a stainless steel centre axis. A spring and stainless steel cushion provide the resilient elements. It has four Ø 5.2 mounting holes in the base and a tapped hole in the centre axis.
Low deflection mounts Low Loads
First of all, it ensures a vibration filtration function.
The main role of these mounts is to isolate vibration. A snubber system limits the movement of the suspended mass (10 mm), however the loads developed in this case, are high.
A wide load range from 0,5 to 32 daN depending upon the application.
In case of shock protection, the structural resistance of the mount can accept acceleration of up to 150 g.
These mounts are mainly suited for vibration, hence the loads generated in case of shock are very high.
Fixation on the inside or on the outside.
VIBCABLE
This range of mounts has a stainless steel cable wound between light alloy bars.
This range of mounts has a stainless steel cable wound between light alloy bars. The 8010 to 8060 versions are assembled using stainless steel clips and the 8080 to 8140 models have galvanised steel screws.
There are two or four mounting holes, per bar, smooth, counter sunk or tapped.
Vibmar
Formed by a perforated plate and an upper fixing point in steel.
The VIBMAR series has a base plate with two or four mounting holes and a tapped steel core.
The elastomer is bonded to the steel.
E1N104 and E1N106 versions have a conical spring embedded in the rubber.
Environmental protection is provided by painting the metal parts and by coating the elastomer with an ozone resistant compound.
V1B HD 50
They allow to limit the reactions at the moment of the shock.
The permitted deflection (40 to 50 mm) of the suspended mass in relation to the mounting base limits reaction under shock. No efficient vibration protection is offerred during shock.
VIBRAFLOT Plates
VIBRAFLOT Plates is the new concept in the carrying out of floating floors.
VIBRAFLOT Plates is the new concept in the carrying out of floating floors its dampen element is the know VIBRACHOC cushion consisting of a yarn of braided steel which has excellent vibration and shot noise damping characteristics.
V1B HD 45
Range of omnidirectional high deflection shock mounts.
Range of omnidirectional high deflection shock mounts made with a square base plate and a threaded core on the upper side.
The elastomer, in natural rubber, is developed especially for navy applications (other materials on demand).
VIBRAFLOT 357 – 961
VIBRAFLOT® is an antivibration system.
VIBRAFLOT® is an antivibration system consisting of the following elements:
– metallic box containing a low frequency spring;
– elastomer sheet to isolate high frequencies;
– system to fift the floating floor and set its height.
Compensadores
El elemento básico lo constituye el fuelle de metal corrugado anularmente.
The basic element of an expansion joint is the corrugated metal bellows, annularly from a longitudinally welded tube, or seamless tube, in one, two or several lamella constructions. Designed and manufactured in compliance with EJMA standards.
V1B HD 56
A complete range of high deflection omnidirectional mounts.
A complete range of high deflection omnidirectional mounts. They are made of two cast iron inserts, a threaded steel plate holding the fixing interfaces is added to one end.
The elastomer is a specially developed natural rubber to meet the navy requirements (Other materials can be delivered on request).
GB 530 mounts
Formed by a part of elastomer adhered to a steel support plate.
The GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core (a nonmagnetic version is also available).
Advantages:
– Can provide high deflection under shocks.
– Long life.
– Low natural frequency (5 Hz in axial).
– Low amplification at resonance (8 at 10).
Shock absorber for transformers
They consist of two steel soles and two high-strength metal springs.
This range of shock absorbers consists of two steel soles and two high-strength metal springs, light alloy joint washers and a metal cushion in stainless steel wire on each spring. An external protective sheet prevents possible intrusions of materials that stiffen the shock absorber.
All steel parts are protected by a layer of paint. These elements are very easy to assemble and adapt to the needs of the equipment.
They comply with the ISO 9001-2000 standard.