Productos
Showing 61–80 of 145 results
The progress in motor vehicle design and increased demand for comfort both in terms of vibration and sound-proofing has resulted inincreasingly demanding specifications for suspension systems.
PAULSTRA hydraulic mountings use an elastomer support device combined with an hydraulic system. The hydraulic system acts differentially and specifically in relation to the frequency range and the type of vibrational excitation incurred.
These mountings, due to a total integration of all components, are still compatible with standard sizes and are as easy to fit as conventional mountings.
Download PDF catalog
Flexible element comprising:
1 Natural rubber in the form of a cross.
2 A floating aluminium star, whose arms are bonded to the rubber.
Mountings:
3 Two aluminium bosses, bonded to the rubber, which will be attached to one of the machines.
4 Two aluminium bosses, bonded to the rubber, which will be attached to the other machine.
5 Band for precompressing the rubber before assembly.
Two retaining bars are supplied although not shown in the photo.
Download PDF catalog
V118-MG and V318 mountings have cast iron cover and base with 4 mountings holes in the base and a central tapped hole in the cover.
The resilient elements are stainless steel wire mesh cushions:
– V118-MG and V318 have two cushions;
– V118-DG and V318-D have three cushions.
Download PDF catalog
Models are available in different elastomers: silicon, fireproofed silicon, fluorosilicon or neoprene, to meet the requirements of the main aeronautics standards (FAR 25 – AIR 7304 – MIL STD 810 – C 172 C -MAR 508 s.o.).
Covering a natural frequency range of 15 to 50 Hz, their applications range from vibration isolation to shock-protection of electronic apparatus and also aircraft fuselage and helicopter cockpit mountings.
Download PDF catalog
There are several types of stops:
– Cylindrical or DIABOLO stops.
– Conical progressive stops.
– LEVAFLEX progressive stops with central cavity.
– EVIDGOM stops.
Download PDF catalog
Flexible element comprising:
1 Natural rubber in the form of a cross.
2 A floating aluminium or steel star, whose arms are bonded to the rubber.
Mountings:
Two aluminium bosses, bonded to the rubber which will be attached to one of the machines.
Two bosses bonded to the rubber which will be attached to the other machine.
Download PDF catalog
Series of all metal low profile mounts with one or two cushions, working in compression only, permitting high dynamic overloads (using a load distribution plate). Mounts can be fixed to floor.
-Made of cups welded on a steel base with one or two stainless steel cushions (inox 18/8).
– The steel parts are painted to protect against corrosion.
Download PDF catalog
Flexible element comprising a variable number of flexible bushes, depending on the torque to be transmitted.
1 Inner with tapped or smooth holes (normal mounting or on fly wheel).
2 Precompressed natural rubber bonded to inner 1 and to outer the half-cylinders 3.
3 Half-cylinders bonded to the rubber.
4 Outer housing ensuring precompression of rubber by exerting pressure on the half-cylinders 3.
Steel disks:
5 Flange to which the inner studs are attached (normal mounting).
6 Disk to which the studs are attached (flywheel mounting).
Die cast steel hubs:
7 The two hubs are identical. They may be bolted to disks 5 or 6 depending on the mounting used.
Download PDF catalog
Rubber blocks of various shapes allowing the absorption of shock, vibration or serving as stops limit.
Download PDF catalog
Fully metallic shock absorber that works with traction and compression and allows large lateral displacements.
– Springs, central axis and steel cups
– Internal elements in stainless steel wire 18/8
– Treatment: Black phosphating
– Weight: 470 gr
Download PDF catalog
The NIVOFIX mounting is an adjustable equipment foot comprising a circular disc bonded to a protected elastomer base. An adjustement screw is fitted into the assembly.
The elastomer base has anti-slip ridges.
Download PDF catalog
This low frequency shock absorber I sable to work in compression and pull. It is able support lateral stresses.
Download PDF catalog
The MINIFIX mounting comprises an elastomer pad with an anti-slipridged surface and a threaded stud allowing accurate height adjustment of equipment. Made in two hardnesses (50 and 80 Sh) the MINIFIX mounting is perfectly suited to a variety of applications and is delivered complete with fixing nuts and washers. MINIFIX mounting nuts and screws are made of steel or stainless steel.
Download PDF catalog
The V164 and V168 dampers have a cover, an AG3 mounting plate andan AU4G shaft. The assembly is chromatised.
The upper and lower stainless steel cushions are the resilient elements of the mounting. It has four Ø 8 mounting holes on the mounting plate and one M10 tapped hole on upper cover.
Download PDF catalog
These medium frequency shock absorbers with multiracial and insensitive to external temperatures characteristics are suitable form limited places. They assure efficient protection of small equipment (electronic or electromechanical) in high frequency vibrating environments (50-3000 Hz). They can be used as mountings or stabilisers.
Download PDF catalog
The TRAXIFLEX mounting comprises two metallic U armatures joined by two bonded rubber blocks.
It is available in two versions: male/female and female/female.
Download PDF catalog
A flexible fixing resistant to oils, the majority of solvents and ageing.
Download PDF catalog
A single acting telescopic anti-vibration manufactured with a helicoil spring and stainless steel woven cushion. Protection, paint.
Download PDF catalog
All elements made of elastomer. Elastomer is compatible with the majority of the industrial environments and has an operating temperature range of -40°C to +83°C.
Download PDF catalog
This shock absorber, viscous type, developed to the combination with shock absorbers such as V-1134, V-1135, V-1136 and V-1209. It can adapt to other type of suspension.