Showing 41–54 of 54 results
This damper is made of an high damping material bonded on an aluminium plate.
A self adhesive layer on the elastomer to ease the installation.
This product will reduce vibrations and noise.
The damping is due to the shearing of the high damping layer.
Download PDF catalog
STRASONIC is a range of complex materials designed to provide the best acoustic isolation. Their structure is based on polyurethane foams or cellular rubber.
Their main function is to reduce airbone noise (Isolation, Absorption and Damping) in partial or complete enclosures of machinery.
Download PDF catalog
Elastomer rings for linking and positioning of equipment while maintaining acoustic discretion and protection from shocks.
A decoupling washer is composed of:
– Two bonded elastomer washers;
– One stainless steel anti-shock washer;
– One stainless steel preload spacer.
Download PDF catalog
The main role of these mounts is to isolate vibration. A snubber system limits the movement of the suspended mass (10 mm), however the loads developed in this case, are high.
A wide load range from 0,5 to 32 daN depending upon the application.
In case of shock protection, the structural resistance of the mount can accept acceleration of up to 150 g.
These mounts are mainly suited for vibration, hence the loads generated in case of shock are very high.
Fixation on the inside or on the outside.
Download PDF catalog
The VIBMAR series has a base plate with two or four mounting holes and a tapped steel core.
The elastomer is bonded to the steel.
E1N104 and E1N106 versions have a conical spring embedded in the rubber.
Environmental protection is provided by painting the metal parts and by coating the elastomer with an ozone resistant compound.
Download PDF catalog
The permitted deflection (40 to 50 mm) of the suspended mass in relation to the mounting base limits reaction under shock. No efficient vibration protection is offerred during shock.
Download PDF catalog
Range of omnidirectional high deflection shock mounts made with a square base plate and a threaded core on the upper side.
The elastomer, in natural rubber, is developed especially for navy applications (other materials on demand).
Download PDF catalog
A complete range of high deflection omnidirectional mounts. They are made of two cast iron inserts, a threaded steel plate holding the fixing interfaces is added to one end.
The elastomer is a specially developed natural rubber to meet the navy requirements (Other materials can be delivered on request).
Download PDF catalog
The GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core (a nonmagnetic version is also available).
Advantages:
– Can provide high deflection under shocks.
– Long life.
– Low natural frequency (5 Hz in axial).
– Low amplification at resonance (8 at 10).
Download PDF catalog
It is made of a stainless steel and epoxy resin sandwich which limits the amplification.
Download PDF catalog
A range of multi directional mounts with very large deflection manufacture with elastomer and metal parts.
The elastomer is based on natural rubber which has been specially developed for marine applications.
Download PDF catalog
Elastomer isolators designed for acoustic isolation and shock protection.
Download PDF catalog
Advantage:
With only 3 profiles, it is possible to perform an anti-vibration suspension for pipes from 6 to 206.5mm in diameter. The cut and curvature of STRAFIX are simple.
Download PDF catalog
Since 1998 VIBRACHOC-PAULSTRA has been conceiving and developing active antivibration systems that complete the VIBRACHOC-PAULSTRA range called “passive” with greater efficiency, especially in low frequency.
The active control combines the knowledge acquired in vibratory mechanics and the effectiveness of electronics.