The originality of this patented system, using new materials for this type of application has, in particular, enabled a reduction in size while increasing reliability (fatigue, shock resistance).
Flexible mountings for low loads MN 75 composite
These mountings were developed to handle small loads under large deflection (75 mm) and provide a low vibration transmission over a wide frequency range (up to 500 Hz).
The system developed provides this dual function effectively and without compromise.
Download PDF catalog
Related products
Laminated bushes
Laminated BUSHES use the same principle as other laminated bearings.
Laminated BUSHES use the same principle as other laminated bearings. Importance is primarily given to radial load capability along Ox and Oy which may be up to 100 tons.
Movement is allowed around an axis Oz or a centre of rotation O. Angular deflection is in the order of 30°.
Download PDF catalog
Decoupling washers
Linking and positioning of equipment while maintaining acoustic discretion
A decoupling washer is composed of:
– 2 bonded elastomer washers
– 1 stainless steel anti-shock washer
– 1 stainless steel preload spacer
Download PDF catalog
Flexible mountings for low loads MN08 – MN09
The main role of these mountings is to isolate vibration.
The main role of these mountings is to isolate vibration. A snubber system limits the movement of the suspended mass (10 mm), however the loads developed in this case, are high.
A wide load range from 5 to 320 N depending upon the application.
Download PDF catalog
Flexible mountings for high loads MN 75 elastomer
Elastomer isolators designed for acoustic isolation and shock protection.
– Natural frequency (vertical and lateral) under nominal load: 4 to 5.5 Hz.
– Maximum displacement under shock:75 mm all in directions.
– Mechanical strength: 30 g